Nylatech MD-Oil

NYLATECH TYPE 6 MONOMER CAST NYLON

Nylatech® MD-Oil

Go to Nylatech MD-Oil product information page>>

Specific Gravity 1.15 g/cm3
Tensile Strength 10,000 - 12,000 (psi)
Compressive Strength @ 10% Deflection 14,500 (psi)
Elongation 30 - 45 %
Tensile Modulus 450,000 (psi)
Tensile Impact, 73°F 80 - 130 ft. lbs./ in.
Flexural Strength 15,000 (psi)
Flexural Modulus 420,000 (psi)
Coefficient of Friction .13 - .20 (dry vs. Steel)
24 Hour H2O .2 - .5 %
Equilibrium H2O 1.0 - 2.35 %
Hardness 80 - 84 (Scale D)
Coefficient of Thermal Expansion 5.5 x 10 (-5) in./in./F
Continuous Operating Temp 220 - 250 Degrees F

All NYLATECH Material is certified to conform with ASTM - D5989 Specification.

NYLATECH ® NATURAL, NATURAL-OIL grades all meet requirements for 21 CFR 177.1500 of the U.S. FDA.

Above values are intended for guidance to material selection only. As with any new application, NYLATECH recommends testing in actual application prior to specification.