Nylatech PVM

NYLATECH TYPE 6 MONOMER CAST NYLON

Nylatech® PVM

Go to Nylatech PVM product information page>>

Specific Gravity 1.13 g/cm3
Tensile Strength 10,000 (psi)
Compressive Strength @ 10% Deflection 12,000 (psi)
Elongation 20 %
Tensile Modulus 430,000 (psi)
Flexural Strength 13,000 (psi)
Flexural Modulus 330,000 (psi)
Coefficient of Friction .14 (dry vs. Steel)
24 Hour H2O .5 %
Equilibrium H2O 4 %
Hardness 79 - 81 (Scale D)
Coefficient of Thermal Expansion 5.5 x 10 (-5) in./in./F
Continuous Operating Temp 240 – 255 Degrees F

Limiting PV value on preliminary test results are 16,000 psi-ft/min

All NYLATECH Material is certified to conform with ASTM – D5989 Specification.

NYLATECH ® NATURAL, NATURAL-OIL grades all meet requirements for 21 CFR 177.1500 of the U.S. FDA.

Above values are intended for guidance to material selection only. As with any new application, NYLATECH recommends testing in actual application prior to specification.