Nylatech Oil

NYLATECH TYPE 6 MONOMER CAST NYLON

Nylatech® Oil

Go to Nylatech Oil product information page>>

Specific Gravity 1.14 g/cm3
Tensile Strength 10,000 (psi)
Compressive Strength @ 10% Deflection 14,000 - 15,000 (psi)
Elongation 35 - 40 %
Tensile Modulus 435,000 (psi)
Tensile Impact 73°F 80 -130 ft. lbs./ in.
Flexural Strength 13,000 (psi)
Flexural Modulus 350,000 (psi)
Coefficient of Friction .17 - .19 (dry vs. Steel)
24 Hour H2O .3 %
Equilibrium H2O 1.0 - 2.8 %
Hardness 80 (Scale D)
Coefficient of Thermal Expansion 5.5 x 10 (-5) in./in./F
Continuous Operating Temp 220 - 250 Degrees F

All NYLATECH Material is certified to conform with ASTM - D5989 Specification.

NYLATECH ® NATURAL, NATURAL-OIL grades all meet requirements for 21 CFR 177.1500 of the U.S. FDA.

Above values are intended for guidance to material selection only. As with any new application, NYLATECH recommends testing in actual application prior to specification.